Wash Basin Bathroom Cabinet Manufacturer Introduces The Installation Skills Of Different Bathroom Cabinets

Update:31-12-2020
Summary:

Wash Basin Bathroom Cabinet Manufacturer introduces the […]

Wash Basin Bathroom Cabinet Manufacturer introduces the installation skills of different bathroom cabinets.

 

1. Installation method of floor-standing bathroom cabinet
Lay the cabinet body of the floor-standing bathroom cabinet horizontally, screw the cabinet foot assembly on the fixing piece through the double-ended screw, then lay the cabinet flat and put it in a proper position, and the cabinet foot should be placed on the outside as far as possible to balance the cabinet body. And adjust to the level by the anchor screw. Check whether the four feet are stable when placed. If they are not on the same horizontal line, the cabinet body will be unevenly stressed and the lines will be distorted, which will not only affect the appearance but also affect the service life.

 

2. Installation method of the main cabinet of the wall-mounted bathroom cabinet
Check whether the wall is solid core (otherwise use the floor type), according to the selected hole position, use a percussion drill to make a hole on the wall (after installing the table top 83cm from the ground), insert the plugin the wall-mounted accessory into the hole, And then use self-tapping screws to lock the cabinet to the wall, or use expansion screws to install. After the cabinet is installed, align the countertop basin with the cabinet's wooden hat and adjust and level it.

 

3. How to install the bath mirror
Measure the size of the mirror with a tape measure, punch holes in the wall according to the installation specifications at a suitable position and install the wall plug, and then screw the screws into the wall to the appropriate depth. Then insert the two holes on the back of the mirror into the self-tapping screws on the wall. In this way, the bath mirror is installed, and finally, the glass of the bath mirror is wiped clean.

 

5. Installation method of auxiliary cabinet and shelf
Measure the position of the holes on the wall according to the position and distance of the holes on the back panel of the cabinet, and punch holes on the wall with an impact drill. Put the plastic plugs in the wall-mounted fittings into the holes, and then use the self-tapping screws to lock the cabinet to the wall. Pay attention to the level when installing.

0
Views: 113